Interactive Set-Up
AX3000 Model 80WMS - User's Manual 51
- 32bpp Image Quality: with the 'medium' and 'high' quality, NScodec will
be used (this will reduce significantly the bandwith). With the 'Maximum' a
legacy codec is used.
3.4 - USB MANAGEMENT
3.4.1 - Specifications
Technical specifications:
- Maximum supported speed: high-speed (480 Mbits)
- Maximal consumption: 500 mA (total current draw for all ports)
Important Note: power hungry non-computing USB devices must not be
connected to the terminal (fans, lights…) as they have the potential to draw too
much current and cause damage to the terminal.
The following USB devices are supported:
- Keyboard,
- Barcode reader,
- Mouse,
- HUB,
- Printer,
- USB-RS232 adaptor,
Touch Screen
- Mass storage device (memory stick, hard drives, CD/DVD readers…),
- Audio device.
Other USB devices are detected but not supported.
USB devices are hot-pluggable and are dynamically detected by the Axel
terminal.
Maximum number of connected USB devices:
- Two keyboards and barcode readers,
- Two mice,
- Two HUBs,
- Four printers or USB-RS232 adaptors,