Axel AX3000 80WMS User Manual

Administration
80 AX3000 Model 80WMS - User's Manual
5.1.2 - Updating the Firmware
The terminal firmware can be updated. This can be done:
- Remotely with the AxRM software. See Chapter 10.
- From a USB memstick.
- With the bootp/tftp protocol.
All Axel products have an ‘FK’ (Firmware key) number. It is important that the
firmware file and Axel hardware have the same FK number. If not the update
will fail.
a) From a MemStick
Select the [Upgrade]-[Firmware]-[Update from USB] menu from the AX3000
set-up. The following box is displayed:
When 'Archiving the configuration' option is selected, before the firmware
upgrade, the configuration file will be stored at the memstick root (the filename
is the terminal MAC address).
The firmware filename can be manually entered or located with the [File
Explorer] button.
Click the [Transfer] button to launch the operation.
IMPORTANT: the terminal will automatically reboot after this operation.
The configuration is not sent automatically to the terminal after the firmware
update.

Axel AX3000 80WMS Specifications

General

Brand	Axel
Model	AX3000 80WMS
Category	Server
Language	English