Appendix
AX3000 Model 80WMS - User's Manual 103
Example 2: router 1 is used to reach both networks (192.168.2.xxx and
192.1.1.xxx):
The AX3000 route table is:
A.3 - THE DHCP PROTOCOL
DHCP (Dynamic Host Configuration Protocol) is an industry standard protocol
that lets a DHCP server (Unix, Windows, AS/400, etc.) allocate temporary IP
addresses and other network parameters to terminals and PCs when they are
powered on. This can greatly simplify managing large networks.
To Next Page
Loading...
Need help?
General
