123R5900102 /11 ClickShare CX-20
5.33 Buttons, External access point, mode EAP-
TTLS
How to fill out the settings
1. Fill out a Corporate SSID.
Image 5–52 Buttons, External access point, mode EAP-TTLS
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
2. Fill out the Domain and Identity.
3. Enter a Password.
4. Upload CA certificate. Click on Choose file and browse to the desired file.
The following formats are allowed:
• .pem
• .cer
• .crt
• .pb7 (Base64 encoded DER)
File should at least contain the root CA certificate for your domain.
5. Click Save Changes to save the settings.
CX-20 Configurator
To Next Page
Loading...
Need help?
General
