R5900102 /11 ClickShare CX-2036
3.12 Camera connection
About USB cameras
Any USB camera with at least a resolution of 720p can be connected to the Base Unit. A list of supported
cameras can be found on Barco’s website.
Since the USB ports are USB 2.0 or higher ports, HDMI cameras are supported via HDMI to USB converter.
To connect
1. Connect the camera via USB to the Base Unit.
Camera connected to the Base Unit is accessible when plugging in the Button. No drivers required, all
camera’s will be visible to the user as “ClickShare Camera”.
CX-20 Installation
To Next Page
Loading...
