17R5900102 /11 ClickShare CX-20
2.2 Security recommendations before starting
Keep your Base Units and Buttons up to date
Barco keeps improving their devices, this means extending existing features and adding new ones, but also
providing security patches. Therefore, it is strongly recommended to keep the Base Units up to date with the
latest available firmware, and ensure Buttons are updated. Always updating your device to the latest firmware.
Therefor, it is strongly recommended to connect your device to internet to get automatic updates.
To insure an update of all Buttons, Barco strongly recommends pairing all Buttons with the corresponding
Base Unit immediately after the Base Unit has been upgraded.
XMS platform
Manage Base Units through XMS (Cloud) management Platform to receive updates.
XMS is Barco’s secure cloud-based solution for the configuration, remote management and real-time status
monitoring of your devices, distributed over different locations. Enjoy easy & automated (scheduling of)
software updates, Base Unit configuration, creation of templates, remote wallpaper installation, user
management and insights to drive Digital Workplace.
Keep Base Units locked away
In case you expect physical tampering of the hardware by malicious people Barco recommends keeping the
Base Units locked away.
Change the default Wi-Fi password
Barco strongly recommends changing the default Wi-Fi password (only applicable when WPA2-PSK mode is
used), this makes it again one step more difficult for malicious people, without physical access to your
devices, to intercept the traffic between Button and Base Unit.
Change the default Configurator password
Barco strongly recommends changing the default Configurator password. Anyone with malicious intentions
who can access the Base Unit locally or via adjacent networks will definitely verify if the Base Unit’s
Configurator can be accessed to extract valuable information like e.g. Wi-Fi credentials.
Getting started
To Next Page
Loading...
Need help?
General
