43R5900102 /11 ClickShare CX-20
3.19 Preferred way to start up
What will be done?
After an optional firmware update check, the configuration wizard should be started to configure the Base Unit.
How to handle
1. Connect the device’s WiFi with the given instructions.
The default SSID is ClickShare-[serial number].
Password : clickshare
2. Once your WiFi connection is made, continue with the network setting of your device.
Browse to http://192.168.2.1
The ClickShare Configurator wizard starts up.
Image 3–12
3. Click Start configuration.
The Firmware update window opens.
CX-20 Installation
To Next Page
Loading...
