R5900102 /11 ClickShare CX-20130
Firmware update without using the Configurator
Next to using the configurator to upgrade the firmware, the following ways are also possible:
• When your device is connected to a network and managed via the XMS (Cloud) management platform, the
firmware can be upgrade via this Management solution. For more information on upgrading firmware in this
way, consult Barco’s web pages on XMS (https://www.barco.com/en/page/xms-cloud-management-
platform).
• Download the firmware on a USB stick and plug in this USB in your device. For more information, see
“Updating the CX-20 firmware”, page 136
CX-20 Configurator
To Next Page
Loading...
Need help?
General
