Programming
5-41
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.13 Reset configuration to default
In this menu you can reset the complete device configuration to default val-
ues. This may be necessary if error messages indicate that configuration
files cannot be loaded.
Reset system configuration may be necessary if error messages indicate
that configuration files cannot be loaded.
After the resetting the system configuration, you have to set all parameters
in accordance with your required configuration again.
When resetting the database the stored measurement history will be
cleared.
To Next Page
Loading...
