Programming
5-42
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.14 Language
● Open the Menu „Language“.
● Select the language used for all messages on the display.
Please mind that the
device will be rebooted
if you save these set-
tings.
Do not implement
these settings if the
ongoing measurement
process must not be in-
terrupted!
If you select another language, the operating voltage has to be applied until
the device is back in the measuring operation mode. Disconnection of the
voltage will cause a data loss.
This message appears
during the restarting
process:
To Next Page
Loading...
