Operation
4-16
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
● Choose in the line below „Input Path“ the file that is to convert.
● Choose in the line below „Output Path“ the folder in which the converted
data shall be saved. Instead of the file name „output“ you can enter a
desired file name.
● Under „Units“ select the output format of the measuring values.
● Under „Decimals format“ select the kind of decimal separator.
● Start converting with the Convert button.
4.4.3 Export service information to an external
data medium
For an analysis by your service staff you can export service information to an
external data medium. Databases, log files and configuring information will
be copied to the data medium. For this purpose open the menu „System In-
formation“ (see section 5.6.15).
To Next Page
Loading...
