BARTEC BENKE HYGROPHIL F 5673 - 5.6.7 Modbus;Profibus

Programming
5-29
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.7 Modbus/Profibus
Use this menu to configure the measuring system for operating in a bus sys-
tem (modbus or profibus).
● Open the menu „Modbus/Profibus“.
● Set the parameters according to the applied bus system.
Parameter
Possible settings
Comments
Modbus
Bus Address
Address of the measuring device
Baudrate
1200
2400
4800
9600
19200
38400
57600
115200
Parity
No Parity
Odd Parity
Even Parity
Interface
RS232
RS485
choosing the type of interface to be used
Profibus
Bus Address
Address of the measuring device
Status
Display of status information
Detailed information to the bus systems see section 8.