BARTEC BENKE HYGROPHIL F 5673 - 5.6.5 Selecting the MC Calculation Method

Programming
5-19
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.5 Selecting the MC Calculation Method
When using HYGROPHIL
®
F 5673 you can select different methods for cal-
culating the moisture content MC [mg/m³, lb/MMscf].
● Open the menu „Select MC Calculation Method“.
● Choose one of the available channels for the MC-calculation.
● Select the method for calculation MC.
DIN 1343
ISO 2533
DIN EN ISO 18453
Bukacek
Bartec 2006
Custom User Factor
You must do further settings when using the calculation method DIN ISO
18453 or Custom User Factor (see below).