Error handling
6-2
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
6.2 Warnings
These messages indicate particularities in the measurement conditions. The
measurement operation is maintained. A warning sign appears in the info
line.
A pressure sensor
should be used in
measurement channel
1 but the pressure
sensor is not connect-
ed or it is defective.
The programmed fixed
value for pressure is
used.
Touch HELP to receive
further information on the warning that is displayed (see section 6.4).
6.3 Errors
All errors preventing the measurement operation are indicated by an error
sign in the status display and in the info line.
A signal is issued at the error output. In addition, limit transgressions due to
wrong or missing calculation bases can be reported.
There is a malfunction
in the optical system in
measurement channel
1, e.g. the fibre-optic
humidity sensor is not
connected or is defec-
tive.
Touch HELP to receive further information on the error that is displayed (see
section 6.4).
To Next Page
Loading...
