Programming
5-16
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6.3 Analog inputs
● Open the menu „Analog Inputs“.
● Choose which one of the three measurement channels you want to
program.
● Then select the measurement variable to be measured via the selected
measurement channel.
5.6.3.1 Temperature
● Define whether to use a temperature sensor or not.
● Under Default value, enter a fixed value. This fixed value will be applied if
no sensor is used.
To Next Page
Loading...
