System description
1-20
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
1.5 Spare parts, accessories
5673-10
AC 100...240 V Class1/Div.2
1 channel pre-installed
284492
5673-11
AC 100...240 V Class1/Div.1 in EEx-d casing
1 channel pre-installed
242057
5673-12
DC 10...36 V Class1/Div.2
1 channel pre-installed
246119
5673-13
DC 10...36 V Class1/Div. 1 in EEx-d casing
1 channel pre-installed
242056
Accessories for evaluation unit
Wall mount / mounting plate
Humidity sensor with integrated Pt 100
Diameter of measuring tube 10 mm, 100 bar, 200 bar against test certificate, calibrated from – 80...+ 20 °C DT
L 1661
Series B
Immersion depth 225 mm RT (for retraction tool)
Special calibration in natural gas (with DAP cali-
bration certificate, calibrated from –20° C, -10° C,
232340
Special calibration in hexane (freely selectable
measurement range)
232165
Special calibration in several gases and liquids
(freely selectable measurement range)
239 022
L 1661 LI
Series B
for measuring
in liquids
Protection cap with Teflon filter 10 µm
Combined fibre-optic cable
Including ST plugs, 2 optical fibres + 6 Cu leads for Pt 100 and pressure sensor, shielded, protected and flame-
retardant according to IEC 332-3A, suitable for field application, temperature range from -20°C to 70°C
1631-112
Special lengths in 5 m steps up to 100 m
Special lengths in 10 m steps, from 100 m up-
wards, max. length: 800 m
Combined fibre-optic cable with extended temperature range
Including ST plugs, 2 optical fibres + 6 Cu leads for Pt 100 and pressure sensor,
shielded, protected and flame-retardant according to IEC 332-3A, s
uitable for field application, temperature range
from -55°C to 70°C
1631-113
Special lengths in steps of 5 m, up to 100 m
Special lengths in steps of 10 m, from a length of
100 m (Max. length 200 m)
XXXXXX