BARTEC BENKE HYGROPHIL F 5673 - 5.6 Program parameters; 5.6.1 Dimension units

Programming
5-12
HYGROPHIL® F 5673 Operating manual, Software version 1.8.x, 387896MDHEN(14.06.2013)
5.6 Program parameters
In this section the
meaning of the individu-
al parameters of all
menus is explained.
5.6.1 Dimension units
In this menu you can define the dimensions units for temperature, pressure
and moisture content.
Measurement variable
Dimension
Temperature TT / DT / FP
°Celsius
°Fahrenheit
Kelvin
Pressure SP / VP
Pa
hPa
kPa
bar
mbar
psi
Moisture Content MC
mg/m
3
lb/MMscF