Basler DGC-2020 - Page 65

9400200990 Rev I DGC-2020 BESTCOMSPlus Software 4-9
DGC-2020
Information about a DGC-2020 communicating with BESTCOMSPlus can be obtained on the Device Info
tab of BESTCOMSPlus.
Select application version
A
when configuring DGC-2020 settings off-line. When on-line, read-only
information includes the application version
B
, boot code version
C
, application build
D
, serial number
E
,
application part number
F
, model number
G
, Language Module Version
H
, and Language Module Part
Number
I
.
Site-specific information for the DGC-2020 can be assigned by the user. This label includes a device
name
J
.
Load Share Module
Information about an LSM-2020 communicating with BESTCOMSPlus can also be obtained on the
Device Info tab of BESTCOMSPlus.
When on-line, read-only information includes the application version
K
, boot code version
L
, application
build
M
, serial number
N
, application part number
O
, and model number
P
. The Refresh button
Q
is used to
refresh the screen after connecting an optional LSM-2020.
Contact Expansion Module
Information about a CEM-2020 communicating with BESTCOMSPlus can also be obtained on the Device
Info tab of BESTCOMSPlus.
When on-line, read-only information includes the application version
R
, boot code version
S
, application
build
T
, serial number
U
, application part number
V
, and model number
W
. The Refresh button
X
is used to
update the screen after connecting an optional CEM-2020.
BESTCOMSPlus device information values and settings are illustrated in Figure 4-10.
Figure 4-10. Device Info Values and Settings
www . ElectricalPartManuals . com