Introduction
1-6 BASLER L304kc
Draft
Cleaning
Avoid cleaning the surface of the CCD sensor if possible. If you must clean it, use a soft, lint free
cloth dampened with a small quantity of high quality window cleaner. Because electrostatic
discharge can damage the CCD sensor, you must use a cloth that will not generate static during
cleaning (cotton is a good choice).
To clean the surface of the camera housing, use a soft, dry cloth. To remove severe stains, use
a soft cloth dampened with a small quantity of neutral detergent, then wipe dry.
Do not use volatile solvents such as benzine and thinners; they can damage the surface finish.
To Next Page
Loading...
