Basler L304kc User Manual

Operation and Features
BASLER L304
kc 3-3
Draft
3.2 Video Data Output Modes
L304kc cameras can output video data in a 3 tap 8 bit mode, a 2 tap 10 bit mode or a 2 tap 8 bit
mode. These modes of operation are described in detail in Section 2.5.5.
3.2.1 Setting the Video Data Output Mode
You can set the video data output mode with the Camera Configuration Tool Plus (CCT+) or by
using binary write commands from within your own application to set the camera’s control and
status registers (CSRs).
With the CCT+
With the CCT+ (see Section 4.1), you use the Video Data Output Mode parameter in the Output
parameters group to select the output mode.
By Setting CSRs
You set the video data output mode by writing a value to the Mode field of the Video Data Output
Mode CSR (see page 4-14).
See Section 4.2.2 for an explanation of CSRs and Section 4.3.1 for an explanation of using read/
write commands.

Basler L304kc Specifications

General

Brand	Basler
Model	L304kc
Category	Security Camera
Language	English