Basler L304kc User Manual

Operation and Features
3-10 BASLER L304kc
Draft
3.3.2.3 Guidelines When Using Free-run
When using free-run mode to control exposure, several general guidelines must be followed:
• The line period must not be lower than
138.6 µs
• The minimum and the maximum exposure time must be within the limits specified in the
Exposure Time CSR (see page 4-15).
• When you are operating the camera in free-run, using the edge-controlled mode will give you
the best performance in terms of signal-to-noise ratio.
3.4 Integrate Enabled Signal
An output signal called Integrate Enabled (IntEn) is available on L304kc cameras. The integrate
enabled signal indicates that an exposure is taking place. The signal will go high when each
exposure begins and go low when the exposure ends. The characteristics of the signal are
described in more detail in Section 2.5.6.
L
We strongly recommend using an exposure time that is at least 10% of the
line period. Exposure times shorter than 10% of the line period will increase
the non-linearity of the camera’s response.

Basler L304kc Specifications

General

Brand	Basler
Model	L304kc
Category	Security Camera
Language	English