Operation and Features
3-48 BASLER L304kc
Draft
Enabling Dark Noise Cancellation
You can enable the dark noise cancellation feature with the Camera Configuration Tool Plus
(CCT+) or by using binary write commands from within your own application to set the camera’s
control and status registers (CSRs).
With the CCT+
With the CCT+ (see Section 4.1), you use the Dark Noise Cancellation parameter in the Image
Enhancement parameters group to enable dark noise cancellation.
By Setting CSRs
You enable dark noise cancellation by writing a value to the Mode field of the Dark Noise
Cancellation CSR (see page 4-33).
See Section 4.2.2 for an explanation of CSRs and Section 4.3.1 for an explanation of using read/
write commands.
To Next Page
Loading...
