Basler L304kc - Page 85

Operation and Features
BASLER L304
kc 3-51
Draft
By Setting CSRs
You enable the color shift correction feature by writing a value to the Mode field of the Color Shift
Correction Mode CSR (see page 4-27).
You set the amount of red color shift correction by writing a value to the Absolute Red Color Shift
Correction field or to the Raw Red Color Shift Correction field of the Red Color Shift Correction
CSR (see page 4-34).
You set the amount of green color shift correction by writing a value to the Absolute Green Color
Shift Correction field or to the Raw Green Color Shift Correction field of the Green Color Shift
Correction CSR (see page 4-35).
You set the amount of blue color shift correction by writing a value to the Absolute Blue Color Shift
Correction field or to the Raw Blue Color Shift Correction field of the Blue Color Shift Correction
CSR (see page 4-35).
Section 4.2.2 explains CSRs and the difference between using the “absolute” field and the “raw”
field in a CSR. Section 4.3.1 explains using read/write commands.