Section VIII
Handling, Serv-
Maint
Oll
CHANGE PROCEDURE
BEECHCRAFT
Debonair
C33
Bonanza E33 and F33
1.
Remove the access plate from the engine
cowl
on
the
lower right side.
2. Locate the oil sump drain plug at the
low
point
of
the
engine sump.
3.
Remove the plug
button
below
the sump
drain
and
insert the
oil drain duct.
4.
Remove the oil sump drain plug.
5.
Remove the oil screen and flush thoroughly. Replace
the screen.
6. Replace
the
oil sump drain plug and
fill
the engine
with
oil.
See Consumable
Materialsand
Approved Engine Oils
for
specifiecl oils.
The engine manufacturer recommends ashless dis-
persant oils. In order to promote faster ring seating and
oil
control, a
straight
mineral
oil should be used
for
the
first
oil
change period or
until
oil consumption stabilizes. Oils
must meet Teledyne Continental Motors Specification
MHS-248.
Refer to APPROVED ENGINE OILS.
BATIERY
The
batt~ry
is accessible
by
opening the right engine
cowling. Check the
electrolyte level after each 25 hours
of
operation and add distilled
water
as necessary. Do not
overfill the battery.
8-18
August
1982
To Next Page
Loading...
