Bernette b79 - Page 14

My bernette
13
2019-02 EN 5020079.00A.04
Number Buttons Name Purpose
6 Securing The function «Securing at sewing start» is
activated in the Setup by default and can be
deactivated by pressing the button «Securing».
When the function «Securing at sewing start»
is not activated in the Setup, it can be
programmed by pressing the button
«Securing».
A securing icon which appears on the display
during sewing indicates that the function is
activated.
The number of securing stitches can be
programmed in the Setup-Program.
> To sew the securing stitches first, press the
button «Securing» before you start sewing.
> To sew the securing stitches at the pattern
end, press the button «Securing» while
sewing.
> To sew securing stitches within a stitch
pattern combination, press the button
«Securing».
– The selected pattern of the combination
is secured according to the setting.
7 Needle up/down > Push the button «Needle up/down» to
lower the needle.
> Push the «Needle up/down» button again
to raise the needle.
8 Upper
Multifunctional
knob
With the «Upper Multifunction knob» setting
values can be changed in the sewing, the
embroidering and the Setup Program.
9 Lower
Multifunctional
knob
With the «Lower Multifunction knob» setting
values can be changed in the sewing, the
embroidering and the Setup Program.
10 Needle left/right There is a total of 15 needle positions. The
needle position is indicated by the needle
position number in the display.
> Press the «Needle left» button to move the
needle to the left.
> Press the «Needle right» button to move
the needle to the right.