Berthold LB 134 - 10. Decision Thresholds and Detection Limits; 10.1 Decision Thresholds and Detection Limits

LB 134 7. Probes for the LB 134
113
1. Turn off the LB 134.
2. Pull out the spiral cable connecting the Tritium probe to the
LB 134.
3. Insert the spiral cable of the β-γ-probe into the LB 134 sock-
et.
4. Turn the LB 134 on. The software identifies the connected β-
γ-probe and sets the measurement mode accordingly.
5. Perform a control measurement.