Proceed in the same manner with all digits of the desired
number.
Once all digits of the desired number have been entered,
press Enter to confirm.
Letters are entered in the same way (01234567890abc...z).
4.4.3 Selecting Items from a List
If you can only select predefined values or categories from a
list, proceed as follows:
Select the parameter with the cursor.
Press the Enter key. The editing mode is enabled. Repeated
press the ↓↑ to view the available options one after the other.
Select the desired option with Enter. The selection is ac-
cepted.
Examples:
Setting the Measurement Mode
Ratemeter
Counter-Timer
Search
Measurement settings for ratemeter measurements:
Averaging criterion
Time constant or
Accuracy
4.4.4 How to Access the System Menu
After power on
After power on, the device automatically goes into the
measuring mode which was set when the device was turned
off (Measurement menu).
In the Ratemeter mode: Select the Menu option by pressing
the Menu key. You get into the System Menu.
In the Counter-Timer mode: Stop the running measurement
by pressing Stop. The Menu softkey appears. Then press
the Menu button.
To Next Page
Loading...
