Berthold LB 134 - 6.2 Description of the Individual System Menu Items

LB 134 5. Contamination Measurements
44
5.1.4 Importance and Editing the Other Nuclide Parameters
In addition to the activation of a nuclide, there are the following
parameters:
Figure 4.13: The parameters of a nuclide
Edit procedure
 Move the cursor (->) to the desired menu item.
 Press the Enter key.
 A list of options or the field for parameter input appears (see
above).
 Enter the desired value, or select an entry from the list.
 Confirm your entry by pressing the Enter key.
Meaning of the parameters
Name: Name of nuclide
Active: Select nuclide for selection prior to a
measurement (small nuclide list)
Radiation Type: Alpha, beta/gamma, gamma, neutron
Mass Number: Mass number from the nuclide table
Unit: Physical unit
Cal. Factor A-100 Calibration factor according to
DIN 25415