EasyManua.ls Logo

Berthold LB 134 - 2.3 Power Supply

Berthold LB 134
157 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LB 134 2. System Description
19
chargeable battery operation, the remaining battery life is 2-4
hours max.!
In this case, the batteries need to be replaced.
2.3 Power Supply
Remove the battery cover by pulling it downward.
Figure 2.7: Open battery compartment
The device can be operated with 4 batteries or (Mignon 1.5V)
rechargeable batteries (Mignon 1.2V).
The polarity of the batteries is indicated at the bottom of the bat-
tery compartment (see. Figure 2.7).
Whenever you turn on the device, you will be informed about
the status of the batteries: The voltage can be viewed on the
menu Parameter/Power supply.
Note:
The RAM which stores the measured values, settings and the
date is regularly supplied with power by a lithium backup battery
when the device is not powered via the mains or batter-
ies/rechargeable batteries. In order to avoid loss of data, we
recommend replacing the lithium battery while the unit is pow-
ered via the mains or batteries/rechargeable batteries. The lithi-
um battery is located on the motherboard and should be re-
placed only by trained personnel.

Table of Contents

Related product manuals