Reset This button resets the Ratemeter parameters, such as min/max
values, cycle storage time, smoothing filter parameters.
∫Start Starts the integral calculation, summing up of the measured
values; for dose rate it starts the dose calculation, start of the
integral time. If the integration was stopped before, it will con-
tinue now. The integration will start all over again only after an
integral reset (see chapter 6.8).
Start/Stop Starts or stops a measurement in the Counter/Timer mode.
The Ratemeter or the Search function run continuously, sepa-
rate start of the measurement is not necessary.
Menu Return to the System Menu.
Info Press this button briefly and repeatedly to view information on
the running measurement. Additional information is displayed
depending on the measurement mode, see chapter 6.5.
6.2 Description of the Individual System Menu Items
The following four displays list all system menu items that are
available in an alpha beta contamination probe. We will now
describe these menus and sub-menus in detail.
To Next Page
Loading...
