Working with the User's Manual
A brief overview of the structure of this user's manual helps you
find important information quickly and easily:
Chapter 1 provides basic information on the design and the mode of opera-
tion of the LB 134, the measurement and averaging methods, and
the meaning of the displays cps and calculated measurement
units.
Chapter 2 contains a description of the monitor:
The design of the device with its control and display elements indi-
cators, the importance of the function keys and the different of
power supply options.
Chapter 3 describes how to take the LB 134 into operation.
Chapter 4 describes the structure and operation of the software.
Chapter 5 provides information on the contamination measurement: Prereq-
uisites of the measurement, measurement procedure and explana-
tion of the individual types of measurement.
Chapter 6 documents all software functions of the LB 134 on the System
menu. This is the reference section of the manual.
Chapter 7 provides an overview of all probes that can be connected at this
time, including the data sheets.
Chapter 8 describes the maintenance works to be performed on the LB 134.
Chapter 9 provides information about the basis of calculation employed by
the LB 134 and the statistical accuracy.
In addition, the conversion of the measured unit from counts per
second to area activities is described so that you can determine
your own calibration factors using the specified formula and a cali-
bration source and enter them in the LB 134.
Chapter 10 describes the statistical error, decision threshold and detection lim-
it.
Chapter 11 The Appendix contains the calibration factor tables.
Chapter 12 provides an overview of the technical data.
To Next Page
Loading...
