BIO RAD CFX96 User Manual

Stand-Alone Operation
62
2. Use the up and down arrow keys to navigate to the RT_DATA folder and then press the
right arrow key to open the folder.
3. Select the file using the up and down arrow keys.
4. Press the Export File (F1) button to export a copy of the run data (.zpcr) to the USB key,
as shown in Figure 56.
Figure 56. Exporting stand-alone run data to a USB key.
5. Use the arrow keys to navigate to the folder on the USB in which to save the file.
6. Click Yes (F1) to confirm the export (Figure 57).
Figure 57. Confirming export to USB key.
Exporting Data Using Email
You can choose to email your data to you directly from the C1000 thermal cycler after the run
completes by configuring the email settings (see “Setting Up Email” on page 65).

BIO RAD CFX96 Specifications

General

Temperature Uniformity	±0.4 °C
Software	CFX Maestro Software
Detection Method	Real-time PCR (qPCR)
Sample Capacity	96-well plate
Excitation Source	LED
Ramp Rate	Up to 5°C/sec
Heating Rate	5°C/sec
Sensitivity	Single copy detection
Power Requirements	100-240 V, 50/60 Hz
Temperature Range	0–100 °C