64
The power supply can be connected via Ethernet (LAN) interface using
Telnet client with the following port:
Telnet Connection
Telnet Port: 5024
Windows XP Users
1. Open a command prompt window, which can be found by going
to Start > All Programs > Accessories > Command Prompt.
Alternatively, you can click on Start, select Run…, and type in
cmd in the Open: input box. Click OK to open Command
Prompt.
2. At the prompt, type in Telnet<sp><device IP><sp>5024 where:
<sp> is a space.
<device IP> is the IP address you have configured for the power
supply.
Example: Telnet 192.168.1.150 5024
3. The following screen will be displayed, and users can enter
remote commands at the prompt, such as *IDN?.
To Next Page
Loading...
Need help?
General
