Boca Pro16 Series - Verbal Response Codes; W Connection Speed Information

103
BOCA PRO16 Reference Guide
COMMAND MEANING
V Verbal Response Codes
Your modem can display either verbal or numeric response codes in
response to various commands.
The V command enables you to select which type of response code you
want to display.
Basic response codes common to all modems are:
Verbal Numeric Meaning
OK 0 Command accepted and executed
CONNECT 1 Carrier detected and connection established
RING 2 Ringing signal detected
NO CARRIER 3 Carrier lost or not detected
ERROR 4 Error in command string or command line
longer than 80 characters or S69 time out
Options
ATV0 Numeric response codes
n ATV1 Verbal response codes
See Also
X command Extended Response Codes
Q command Quiet (Suppress Response Codes)
\V command Error Correction Response Codes
SRegister 95 Extended Response Codes
FA full description of all Response Codes is contained in Appendix A
Range
0-1
COMMAND MEANING
W Connection Speed Information
The W command allows you to decide whether your modem will report
its line speed or terminal speed when it connects to another modem.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:38 PM103