Boca Pro16 Series - Dialing and Connection Commands

To Next Page

To Previous Page

BOCA PRO16 Reference Guide

Command /Speed Command/Speed

B12

V.32 (Non-TCM) at 9600 bps

B28 V.34 at 4800bps

B13 V.32 at 9600 bps B29 V.34 at 7200bps

B14 V.32bis at 12,000 bps B30 V.34 at 9600bps

B15 V.32bis at 14,400 bps B31 V.34 at 12,000bps

Appending ! to the B command locks the modem to the specified speed

e.g. ATB19! forces the modem to operate only at V.34 21,600bps

FV.34 will automatically fallback to V.FC if the remote modem does

not support V.34

See Also

A command Answer

*C commandDisable V.34

B command Select Communication Standard

D command Dial

COMMAND MEANING

D Dial

This command allows you to dial a telephone number. The basic dialing

command is:

ATD followed by the telephone number.

For example:

To dial the number (09) 111-1234

• Type: ATD091111234 <E>

You can use hyphens, spaces or parentheses. They will be ignored by the

modem, but they will make it easier to read the command line.

For example:

ATD (09) 111-1234

FThe D command must be the final command on a command line,

unless you use the ; dial modifier.

Command Descriptions

Command

Descriptions

pro16ref.pm6 6/14/96, 2:37 PM87