138
BOCA PRO16 Reference Guide
COMMAND MEANING
%C Compression Control
Data compression is a technique used to reduce the size of data being
transmitted without losing any of the original information.
Compressed data must be decoded at the receiving end of the commu-
nications path in order to extract the original information.
Full details on the subject of data compression can be found in the Error
Correction Section of this guide.
FWhen selecting a data compression mode, error correction must also
be selected. (See the \N command for details of error correction.)
Options
AT%C0 Compression disabled
AT%C1 MNP 5 compression enabled
AT%C2 V.42bis data compression enabled
n AT%C3 V.42bis data compression enabled with fallback to
MNP 5
See Also
\N command Error correction
*V command V.42bis compression table size
Example
AT%C3\N3 Select V.42bis with auto-reliable error correction
AT%C1\N3 Select MNP5 with auto-reliable error correction
Range
0-3
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:38 PM138
To Next Page
Loading...