Boca Pro16 Series - I Identity; L Speaker Volume Control

95
BOCA PRO16 Reference Guide
COMMAND MEANING
I Identity
Your modem contains a product identity code, also known as the
firmware identity code.
You can use the I command to display these codes.
Options
ATI0 Display numeric identity code
ATI1 Return a checksum of modem’s firmware
ATI2 Verify modem firmware checksum and return a result of OK
or ERROR
ATI3 Display model identifier
ATI4 Display code revision and creation date
ATI5 Display manufacturer identification
ATI8 Display complete product identification
ATI9 Display complete product identification
Range
0-5, 8, 9
COMMAND MEANING
L Speaker Volume Control
Your modem has a volume control which allows you to adjust the
volume of its internal speaker.
Your modem is preset for comfortable listening levels in a normal office
environment, so most users will not need to change the preset volume of
their modem.
There are four speaker volume levels:
0 Lowest volume level
1 Low volume level
2 Medium level
3 Highest volume level
To adjust the volume level:
• Type: ATL0 <E>
(or type 1,2,3 as appropriate)
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:37 PM95