150
BOCA PRO16 Reference Guide
COMMAND MEANING
\J Auto-Reliable Fallback
This command allows you to select whether your modem (when oper-
ating in auto-reliable mode) will use Constant Speed mode or Variable
Speed mode.
If, with \J0 selected, an error corrected auto-reliable connection cannot
be established with another modem, the modem will fall back to
Constant Speed mode.
Selecting \J1 will cause the modem to operate in Variable Speed mode.
If an error corrected auto-reliable connection cannot be established with
another modem, the modem will fall back to Variable Speed mode after
sending the CONNECT message to your computer. The modem will
alter its terminal speed to match the connection speed to the remote
modem.
Options
n AT\J0 Fallback Constant Speed mode
AT\J1 Fallback to Variable Speed mode
Range
0-1
COMMAND MEANING
\K Break Control
The \K command determines how the modem will react when a break
sequence is sent from your computer or received from the remote
modem.
During error corrected connections the modem sending the break
determines how the receiving modem will react. During non-error
corrected connections, the receiving modem determines how it will
react.
The default break control setting is \K5.
The following tables show how the modem will react when it receives a
break sequence from either the remote modem or your computer.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:39 PM150
To Next Page
Loading...