Boca Pro16 Series - Full Command Descriptions; Escape Sequence

To Next Page

To Previous Page

BOCA PRO16 Reference Guide

COMMAND MEANING

+++ Escape Sequence

When the modem is in on-line-state, issuing an escape sequence will

force it to return it to on-line command state, without disconnecting.

Unlike other commands, you should not type AT before the escape sequence, nor

type a carriage return after it. Instead, wait a full second before you type

the escape sequence and then a full second after typing it. As soon as the

modem returns to local command state, it will respond with the mes-

sage: OK

This waiting period before and after the escape sequence is called the

Escape Sequence Guard Time. This allows the modem to distinguish the

escape sequence from the normal flow of information between modems.

You can change the character used for the escape sequence by changing

the value of S Register 2.

You can change the length of the escape sequence guard time by

changing the value of S Register 12.

Options

+++Return to local command state