Boca Pro16 Series - Using Your Modem with BBS Software

210
BOCA PRO16 Reference Guide
Using your modem with BBS software
Terminal Software Speed: 38,400 bps or 19,200 bps
Command: ATB0S0=0&D2\N3%C2&K3X5\V0
Explanation:
B0 Allows the modem to auto-range, in order to connect at the
highest possible speed with the remote modem.
S0=0
Disables auto-answering of incoming calls. Most BBS programs
perform answering themselves.
&D2 The modem will hang up if the BBS software lowers the DTR
signal. The modem will not be able to dial until the BBS
software asserts DTR.
\N3 Selects error correction. Will fallback to non-error correction
mode if the other modem does not support it.
%C2 Selects V.42bis data compression. The modem will fallback to
non-compression mode the other modem does not support it.
If you wish to fallback to MNP class 5 data compression (and
then non-compression mode) issue the %C3 command instead
of %C2.
&K3 Selects RTS/CTS flow control. Your BBS software must also
have RTS/CTS flow control selected. This ensures data is not
lost between your modem and computer.
X5 Selects extended response codes. Will report to you the speed
of the connection your modem establishes with the remote
modem.
\V0 Disables MNP response codes and connection details.
Sample Setups
Sample Setups
pro16ref.pm6 6/14/96, 2:39 PM210