Boca Pro16 Series - K CTS During Dial & Handshake; L Display Line Signal Level

142
BOCA PRO16 Reference Guide
COMMAND MEANING
%K CTS During Dial and Handshake
This command may be used with computers that expect the CTS signal
to be raised when your modem is connected to a remote modem and is
ready to send data.
This command will interfere with the Abort Connection command (&N)
if your computer cannot send characters to the modem when CTS is low.
Options
n AT%K0 CTS operates normally
AT%K1 CTS is lowered when an ATD command is issued and
remains low until a connection is established
See Also
&N command Abort Connection
Range
0-1
COMMAND MEANING
%L Display Line Signal Level
The %L command allows you to display the received signal level. The
value returned is a 3-digit number, for example:
009 = -9 dBm
043 = -43 dBm
Options
AT%L Display received signal level
Examples
• Type: AT%L <E>
The line signal level is displayed.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:38 PM142