Boca Pro16 Series - Hook Flash; L Last Number Redial

92
BOCA PRO16 Reference Guide
L last number redial
This modifier allows the last number dialed to be re-dialed. The L can
be used as a modifier after a number prefix ( but cannot have any number
following). The last number dialed is saved in NVRAM. The last
number dialed is displayed on the &V display.
For example:
• Type: ATD9999876 <E>
ATDL will dial 9999876
• Type: ATDT02L <E>
This will set tone mode, then dial 02 and then 9999876
! hook flash
The ! dial modifier issues a hook flash signal — the modem hangs up for
a short period.
Hook flashes are commonly used with PBXs to transfer calls.
For example:
To dial 0, hook flash and then dial 12345:
• Type: ATD0!12345 <E>
S Register 29 sets the duration of the hook flash.
S=ndial stored phone number n
The modem allows you to store phone numbers in non-volatile memory.
The S dial modifier enables you to dial these phone numbers.
The n indicates which stored number you want to dial. To store
numbers, use the &Z command. Refer to your Product Guide for
information regarding how many phone numbers your modem can
store.
For example:
To dial the stored number two:
• Type ATDS=2 <E>
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:37 PM92