45
BOCA PRO16 Reference Guide
FThe remote modem must not only support SuperSecure but must also
have a matching username/password and KEYS before access can be
gained.
Accessing a System Using SuperSecure
If both your modem and the remote modem have been correctly setup
you can:
qDial the remote system.
qThe modems will connect and enter security dialog mode using the
modem’s primary key.
qThis key must be the same for both modems.
• Enter your username
• Press ENTER
• Enter your user password stored in the remote modem then ‘/’
• Enter your password stored in your modem
• Press ENTER
FYou may backspace to correct errors but you will not be able to see
what is typed since all characters are echoed as #
• Do not use the / character in any password
• If the password is the same on both modems then only one password
needs to be entered
Connection
qYou will then CONNECT if the username, both passwords, all of the
KEYS, IVs and KEs match.
qThe data will be correct and error free, but encrypted on the line using
a KEY unknown to anyone.
Disconnection
qIf the primary DES KEY mismatches you will not be able to read
the “username” prompt.
Security and Encryption
Security &
Encryption
pro16ref.pm6 6/14/96, 2:36 PM45
To Next Page
Loading...