Boca Pro16 Series - DIC Disregard Incoming Call; PRN Stored Phone Number

168
BOCA PRO16 Reference Guide
Options
CRS 4 Dial stored number 4
See Also
PRN command Store Phone Number
COMMAND MEANING
DIC Disregard Incoming Call (V.25bis)
The DIC command is used to disregard incoming calls.
When your modem receives an incoming call, an INC message is sent to
your computer. You then have the number of seconds defined by S
Register 71 to disregard the call.
If you issue the DIC command, the call will be ignored, otherwise the
modem will answer the call after the number of seconds defined by S
Register 71.
Options
DICDisregard incoming call
See Also
CIC Connect incoming call
S Register 71 Ignore incoming call
COMMAND MEANING
PRN Store Phone Number (V.25bis)
The PRN command allows you to store phone numbers in your modem’s
non-volatile memory.
The command takes the form:
PRNn;x
where x is the phone number you want to store and n indicates
which of the stored phone numbers it will be saved as.
Stored phone numbers may contain up to 20 characters, including dial
modifiers.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:39 PM168