191
BOCA PRO16 Reference Guide
S REGISTER MEANING
66 Remote Access Guard Time
The Remote Access Guard Time is the time delay required immediately
before and after entering a remote access sequence.
If the Remote Access Guard Time is one second and the remote access
character has been defined as * (asterisk), you must maintain silence on
the line for one second, then type **** (four asterisks) in rapid succession,
then maintain another one second’s silence.
The guard time is in units of 100 milliseconds (1/10th of a second).
Example
ATS66=20 Set the remote access guard time to two seconds.
Default 10
See Also
S Register 67 Remote Access Character
#A command Universal Remote Access
**** command Remote Access Sequence
Range 1-255
S-Registers
S-Registers
pro16ref.pm6 6/14/96, 2:39 PM191
To Next Page
Loading...