84
BOCA PRO16 Reference Guide
Remote Control Enabled
If the #A1 command has been issued, your modem does not ask for a
password upon receiving the remote access sequence.
The remote operator may then type AT commands to the remote
modem. The following commands are not allowed:
ATA, ATD, ATH, ATZ, AT&T
To exit Remote Access mode, the remote operator must:
• Type: ATO
Options
**** Request remote access
See Also
#A command Universal Remote Access
S Register 66 Remote Access Guard Time
S Register 67 Remote Access Character
COMMAND MEANING
? Interactive Command Help
Your modem will display information about the AT commands it
supports if you type a question mark (?) in your AT command.
You can view the modem help as ‘pages’ of information. This allows you
to read the information at your own pace.
Press the Spacebar to view the next help page, Backspace or Delete to
view the previous page, or ENTER to quit from the help pages.
You may also search for certain commands or words.
S Registers 96 and 97 allow you to change the length and width of each
help page to suit your communications software.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:37 PM84
To Next Page
Loading...