157
BOCA PRO16 Reference Guide
COMMAND MEANING
\V Error Correction Response Codes
The \V command allows you to select the error correction response
codes when an error corrected connection is established. With error
correction response codes enabled, the following messages are returned
when a connection is established using error correction:
* These messages are only generated if W0 or W1 is selected (display DTE
speed).
** Series 6 only
If the ATX0 command has been issued, only the CONNECT/REL will be
generated by the modem, regardless of the connection speed, after the
\V1 command is issued.
V.FC/V.34 V.32/V.32bis Other
Num Verbal Modems Modems Modems
20 CONNECT/REL ✓✓ ✓
22 CONNECT 1200/REL ✓✓ ✓
23 CONNECT 2400/REL ✓✓ ✓
24 CONNECT 4800/REL ✓✓ ❋
28 CONNECT 7200/REL ✓✓
25 CONNECT 9600/REL ✓✓ ❋
26 CONNECT 12000/REL ✓✓
27 CONNECT 14400/REL ✓✓
43 CONNECT 16800/REL ✓
44 CONNECT 19200/REL ✓❋ ❋
45 CONNECT 21600/REL ✓
46 CONNECT 24000/REL ✓
47 CONNECT 26400/REL ✓
48 CONNECT 28800/REL ✓
49 CONNECT 38400/REL ❋❋ ❋
50 CONNECT 57600/REL ❋❋ ❋
70 CONNECT 76800/REL ❋❋ ❋
71 CONNECT 96000/REL ❋❋ ❋
72 CONNECT 115200/REL ❋❋ ❋
73 CONNECT 230400/REL ❋ ❋
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:39 PM157
To Next Page
Loading...