Boca Pro16 Series - U V.25 Bis Character Set; Verifier

137
BOCA PRO16 Reference Guide
COMMAND MEANING
#U V.25bis Character Set
The #U command is used to select the character set to be used when
V.25bis mode is selected.
ASCII characters are used by most computers; EBCDIC characters are
used primarily by IBM mainframe computers.
Options
n AT#U0 ASCII character set
AT#U1 EBCDIC character set
Range
0-1
COMMAND MEANING
#V Verifier
The #V command selects whether your modem will check the validity of
the commands you issue to it. Your modem can check both AT com-
mands and values you write to the S Registers.
When you use the #V0 command, no checking is performed on com-
mands you issue. If you issue an unsupported command, the modem
responds with an OK message.
With #V1 selected, if you attempt to issue an invalid command or read
or write to a reserved S Register, the modem will return an ERROR
message.
FIf you issue an AT command string containing multiple commands,
and one has incorrect syntax then none of the commands in the line will
be executed.
Options
AT#V0 Command and S Register verifier off
n AT#V1 Command and S Register verifier on
Range
0-1
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:38 PM137