91
BOCA PRO16 Reference Guide
If the phone number is engaged, the modem will return a message: BUSY
This modifier is useful for remote access databases which require an
identification code to be tone dialed before those databases generate an
answer tone.
For example:
To tone dial a remote database on 999-1234, wait for a five-second silence
and then tone dial an ID code of 1234:
• Type: ATDT9991234@1234 <E>
J initiate MNP 10 at 1200 bps
This modifier allows you to select MNP 10 and make the initial connec-
tion at 1200 bps (V.22). MNP 10 is able to automatically adjust the line
speed to suit the quality of the phone line. Refer to the chapter titled
‘Error Correction’ for details of MNP 10.
For example:
To dial the number 999-9876 using MNP10:
• Type: ATDJ9999876 <E>
M initiate MNP 10 at 4800 bps
This modifier allows you to select MNP 10 and make the initial connec-
tion at 4800 bps (V.32). MNP 10 is able to automatically adjust the line
speed to suit the quality of the phone line.
For example:
• Type: ATDM9999876 <E>
K MNP 10 Cellular Option
The K dial modifier allows MNP 10 automatic power level adjustment
for this call only. Normally MNP 10 power level adjustment is switched
on and off with the )M command.
F or ^ disable calling tones
The F dial modifier (or the dial modifier ^) allows you to switch off
calling tones for a data call.
Command Descriptions
Command
Descriptions
pro16ref.pm6 6/14/96, 2:37 PM91
To Next Page
Loading...