Boca Pro16 Series - S 67 - Remote Access Character; S 69 - Command Line Timeout

192
BOCA PRO16 Reference Guide
S REGISTER MEANING
67 Remote Access Character
S Register 67 contains the ASCII value of the characters which form the
remote access sequence.
The default value of this register is 42 (asterisk character). The modem
will recognize four * characters (****) as the remote access sequence.
Examples
ATS67=36 Recognize four $ ($$$$) characters as the remote access
sequence
Default 42 (the * character)
See Also
ATS67=36 Recognize four $ ($$$$) characters as the remote access
sequence
Range 1-125
S REGISTER MEANING
69 Command Line Time Out
S Register 69 determines how long you have to type a command, after
typing an ‘AT’, expressed as seconds. If the modem times-out before you
complete a command, an ERROR message will be sent by the modem.
The default value of 60 allows you 60 seconds between the time you have
typed ‘AT’ and when you press the ENTER key.
A value of 0 (zero) disables this feature.
Examples
ATS69=120 Allow 120 seconds to type a command to the modem
before timing out.
ATS69=0 Never time-out a command
Default 60
Range 0-255
S-Registers
S-Registers
pro16ref.pm6 6/14/96, 2:39 PM192